![]() ![]() Install the remaining components in the revere order of the removal noting the following torque specifications:Ĭrankshaft pulley: 9-13 ft.Rotate the crankshaft clockwise 2 turns and be sure all marks are still correctly aligned. ![]() Loosen the tensioner pulley and allow the tensioner spring to apply tension on the belt, then tighten the lockbolt to 28-38 ft.Install the timing belt onto the pulleys, as follows, crankshaft pulley first, then the idler pulley, exhaust camshaft pulley, intake camshaft pulley, and the tensioner pulley.Install the timing belt tensioner pulley, move the tensioner to its furthest point and tighten the lockbolt.Remove the timing belt tensioner pulley.If the timing belt is to be reused, mark the direction of rotation on the timing belt.The timing belt for Kia Spectra ensures that your engine's valves open and close in a proper manner, and it also makes sure the crankshaft and camshaft are rotating in sync with each. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm) NOTE: Replace tensioner spring if timing belt. Apply a force of 22 lbs to timing belt between camshaft sprockets. Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm). Verify that the I and E mark on the camshaft pulley align with the mark on the cylinder head.ĭo not move the crankshaft or camshaft once the timing marks have been correctly positioned. Make sure its engine components are able to communicate effectively with the purchase and installation of a new, custom Kia Spectra timing belt from AutoZone. Turn crankshaft 2 revolutions in direction of rotation and check that timing marks are still in alignment.Position the crankshaft so that the timing mark is aligned with the timing mark on the engine.Remove the upper and lower timing belt covers.Remove the water pump and crankshaft pulleys.Before servicing the vehicle, refer to the Precautions Section.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |